The plain melt brown filter cartridge is the standard product adopts 100% pure & new pp material without any additives added assure that the quality of Fucome company melt-blown filter to achieve the first class. The cartridges are random self-bonding to form 3D micro pore which make the cartridge different diameters at high temperature to create ideal polygradient compact structure. The structure PP depth cartridge is functioned with fine fibers in inner layer and coarse fibers in outer layer which constitutes different pore diameter in order to filtrate particles in different layer.The filter cartridge featured with higher porosity, more subtle pore size, low pressure drop, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
--Filtration of electronic
--Filtration of drinking water treatment
--Filtration of industrial water treatment, like power, plating and oil industry.
--Filtration of food and Beverage such as Bottled water, wine, beer pre-filtration
--Filtration of pre-filtration of DI & RO system for industry
--Filtration of chemical, solvent like coating, pharmaceutical injection solution
--Thermally bonded 100% pure polypropylene without use of any binders & adhesives.
--Materials are FDA listed as acceptable for potable and edible;
--High contaminant holding capacity and low pressure loss
--Spun fibers from a true gradient density from outer to inner surface
--Non fiber releasing & migrating media
--Wide chemical compatibility, various micron ratings( 1um~100um)
--100% polypropylene with great chemical resistance
--The structure is fine to coarse from inner to outer layer
--Multi-layer structure and depth pattern ensure good filtration efficiency
--Thermal bond without any binders and adhesives
--Larger particles are filtered in coarse outer layer
--Smaller particles are filtered in fine inner layer
Indication of when the melt blown filter should be replaced
--Fucome melt blown depth filters use for pre-filtration of industry DI & RO system
--Particles are trapped in multiple depth structure layers while central core is still not polluted
--High quality and good filtering effect help enhance the long service life and save much cost
--Various end caps fit for different housings
--Special specification end caps can be customized
Max. Operating Temperature | 60 ℃(140℉) |
Max. Differential Pressure | 3.0 bar at 27℃ (43 psi at 80℉) |
Recommended Change Out Differential Pressure : | 1 bar (14 psi) |
Filter Media | Polypropylene |
Length | 5",9.75"9.8",10",20",30",40",50" ,60" |
Micron Rating | 1, 5, 10, 20,30, 50, 75, 100 μm |
Inside Diameter | 0.8"(20mm), 0.9"(23mm), 1"(26mm), |
Outside Diameter | 2.36"(60mm),2.4"(61mm), 2.5"(63mm), 2.55"(65mm) |
Core | PP |
Gasket/O-ring | Silicone, EPDM, Viton, Teflon encapsulated Viton |
End Cap | Flat ,222 O-Ring,226 O-Ring,Fin |
--Firstly plastic bag packed
--Then put into cartons.
--Finally packed in standard export box or packed in pallet.
--We can also package it according to your requirements
Quantities per carton are as follows:
·10”(254 mm) ....................... | 50 pcs/ctn | ·20”(508 mm) ........................ | 25 pcs/ctn |
·30”(762 mm) ....................... | 25 pcs/ctn | ·40”(1016 mm) ...................... | 25 pcs/ctn |
·50”(1270mm)....................... | 25 pcs/ctn | ·60”(1524mm)........................ | 25 pcs/ctn |
Normal type : FCPP-D-M-Rating-Length
FCPP | ID | OD | Rating | Core | Length | End Cap Type | Seal material |
Fucome PP Melt Blown Filter Cartridges | A:20mm | J:60mm | 01:1μm | W:With Core | 5: 5" | Ⅰ-222/Flat end | V:Viton |
B:23mm | K:61mm | 05:5μm | N:Without Core | 9.75:9.75" | Ⅱ-222/Fin | S: Silicon | |
C:26mm | M:63mm | 010:10μm |
| 9.8:9.8" | Ⅲ-226/Flat end | E:EPDM | |
D:28mm | Y:65mm | 020:20μm |
| 10:10" | Ⅳ-226/Fin | B:NBR | |
E:30mm |
| 030:30μm |
| 20:20" |
|
| |
F:33mm |
| 050:50μm |
| 30:30" |
|
| |
|
| 075:75μm |
| 40:40" |
|
| |
|
| 100:100μm |
| 50:50" |
|
| |
|
|
|
| 60: 60" |
|
| |
Other Customized Sizes |
|
|
|
|
For Example:
--FCPP-E-M-01-N--01-10-Ⅰ-S
--PP Melt Blown Filter Cartridges,ID:30mm, OD:63mm, Rating:1μm ,Core:Without Core,Length:10",End Cap:222/Flat end, Seal:Silicon
-Good reputation with reliable service
-Superior filter media with reasonable price
-Advanced technique with leading design
-Strict quality control with timely delivery
Fucome Filtration Co., Ltd.
Phone: +86-13824255689
Tel: +86-752-8491916 , Fax: +86-752-2203183
E-mail: vincent@fucome-filtration.com , info@fucome-filtration.com
Skype: Skype:zhangxiaoyuan
Address: No.9 Ban zhang hu 1st Road, Henan'an, Huicheng District, Huizhou, Guangdong, China P.C. 516001